Receipt The work of laying
|
First, back splash and Albaj
Note the following in the splash:
1. Make sure to match the proportions of the components used Plash specifications and fill all the holes before the splash paper Chkaar.
2. Make sure before install strips from Plash mesh stretched display (10-15 cm) between any component of concrete and buildings, so that proves half of the concrete and the other buildings in order to resist the expansion and contraction caused by temperature change and humidity.
3. Thickness of not less splash for 1 / 2 cm (half cm).
4. Mortar paste Plash be coherent and not a liquid and sprayed machine or ejaculation strong on the surface of buildings.
5. The lack of homogeneity of thieves and back splash.
6. Plash is a rough surface and tapered to accept the coherence of the lining layer.
7. Is sprayed water a day, morning and evening for at least two days.
Note the following in the work of Albaj:
8. Is the work of Albaj at distances of not more than 2.00 meters in the horizontal and vertical directions, up half a meter above the ground and under the roof by about half a meter.
9. Are reviewed Planer Albaj string vertically and horizontally balance a ruler and check the health of the aluminum angle metal corner.
10. Quadrisection are the dimensions of bodies at work Albaj.
11. Albaj are broken down after the completion of the lining and repair work place.
Second: blank roughing and Lining:
1. Decline rates of the components of white mortar lining in accordance with the percentages in the technical specifications for the project.
2. Thickness of not more than blank walls of 2.5 cm and not more than the thickness of egg Bishop of 1.5 cm.
3. Tdra Bakdh lining in three directions (horizontal / vertical / country), making sure Planer straightedging and cleanliness.
4. Make sure there are no spaces between the straightedging and white.
5. Are afraid Balbrooh surface after the completion of the shield-edge in the case of blank roughing In the case of lining dry before combing the lining according to the type Aldharh it.
|